- Product Specs
-
Additional Information
Manufacturer CISCO Manufacturer Part Number AX-RJ48-8E1 SKU GROUP-118529 Ethernet Technology Fast Ethernet Flash Memory 128 MB Marketing Information - The Cisco MGX 8850 AXSM Enhanced (AXSM-E) ATM Switching Module is a high-density, double height service module for use in the Cisco MGX 8850 Multiservice Switch in combination with the high-capacity PXM-45 processor switching module.
- The AXSM Enhanced ATM Switching Module, in conjunction with the PXM-45, AXSM (Broadband ATM Switch Service Module), and Route Processor Module (RPM), offers the industry's most advanced and reliable ATM networking features, such as Private Network-Network Interface (PNNI), switched virtual circuit/path (SVC/SVP), soft permanent virtual circuit/path (SPVC/SPVP), and Multiprotocol Label Switching (MPLS).
Description 8 x E1 Cable Type Serial Application/Usage Data Networking Height 7.3" Width 15.7" Depth 15.8" Additional Warranty Information - Limited lifetime warranty covers product's return to factory for free repair
- Power supply and fan covered for first five years of product ownership
Antenna Gain 2 dBi Antenna Type Dipole Antenna Brand Cisco Broadband Transmission Technology Cellular Cable Length 10 ft Carrier Supported ISDN Certifications & Standards - UL 60950-1
- C-UL to CAN/CSA 22.2 No.60950-1
- TUV/GS to EN 60950-1
- CB to IEC 60950-1
- CCC
- FCC Part 15 Class A
- EN55022 Class A (CISPR22)
- EN55024 (CISPR24)
- CE
- VCCI Class A
- AS/NZS CISPR22 Class A
- KCC
- China EMC
Compatibility - Cisco MGX 8800 Series Switches
- Cisco MGX 8200 Series Edge Concentrator
Compatible Rack Unit 1.5U Conductor Copper Connector on First End 1 x 60-pin LFH Connector on Second End 1 x 25-pin DB-25 Female Device Supported Modem Ethernet Aui Yes Expansion Slot Type HWIC Fast Ethernet Port Yes Features Quality of Service (QoS) Fiber Mode Supported Multi-mode Form Factor - Rack-mountable
- Desktop
- Wall Mountable
Frequency 50 Hz to 60 Hz Product Name 8-port E1 Backcard Gigabit Ethernet Port Yes Input Voltage 48 V DC Input Voltage Range 240 V AC Input Voltage Type AC Interfaces/Ports Details 8 x RJ-48 E1 ISM Band Yes Layer Supported 3 Limited Warranty 90 Manageable Yes Management - SNMP v2,v3
- Web-based Management
- MIB
- Telnet
- CiscoWorks
- HP OpenView
- CLI
- DHCP
- VLAN
- Cisco Configuration Professional
- Cisco Configuration Engine support
- Cisco IOS Embedded Event Manager (EEM)
Management Port Yes Maximum Data Transfer Rate 2.05 Mbit/s Maximum Memory 384 MB Memory Card Supported CompactFlash Memory Size 64 MB Memory Technology DRAM Alt Part No AXRJ488E1 MTBF 300000 Hour Network Technology E1 Product Type Expansion Module Number of Network (RJ-45) Ports 2 Number of Serial Ports 2 Number of Total Expansion Slots 1 Number of Broadband (RJ-45) Ports 2 Output Voltage -56 V DC Output Power 265 W Packaged Quantity 1 package type Retail Additional Information - Used with Frame Service Modules
- Used with Circuit Emulation Service Modules
PoE (RJ-45) Port Yes Port/Expansion Slot Details 8 x Fast Ethernet Network Power Source AC Supply Product Line Catalyst Security Features - NAT
- Network Admission Control (NAC)
- SSL
SKU UNSPSC 43222600 Standard Memory 384 MB Total Number of Network Ports 8 Total Number of Ports 15 Twisted Pair Cable Standard Category 5 Usb Yes Wireless LAN Standard IEEE 802.11n Wireless Security - WPA
- WPA2
- WEP
Wireless Transmission Speed 21 Mbit/s - Description
-
Details
8 x E1 - Reviews
-
Write Your Own Review
Are you looking for a certain product that you cannot find on the website? Or maybe you just have a few questions about a particular item. Feel free to call us or contact us by email. You may also fill out the contact form below and we will get back to you as soon as possible.
Address: 995 Montague Expressway Milpitas, CA 95035
Phone: 1-855-889-8866
Email: sales@advanteco.com