CISCO NM-1T3/E3 Switching Module | AdvanTec

Loading Product Options

The Cisco T3/E3 Network Module provides high-speed WAN access for the Cisco 2600, 3600, and 3700 series routers. T3/E3 WAN access enables the network to carry high volumes of data and rich multimedia content, while providing low latency for voice over IP (VoIP).

Additional Information

Manufacturer	CISCO
Manufacturer Part Number	NM-1T3/E3
SKU	GROUP-152759
Ethernet Technology	Gigabit Ethernet
Marketing Information	The Cisco T3/E3 Network Module provides high-speed WAN access for the Cisco 2600, 3600, and 3700 series routers. T3/E3 WAN access enables the network to carry high volumes of data and rich multimedia content, while providing low latency for voice over IP (VoIP).
Description	The Cisco T3/E3 Network Module provides high-speed WAN access for the Cisco 2600, 3600, and 3700 series routers. T3/E3 WAN access enables the network to carry high volumes of data and rich multimedia content, while providing low latency for voice over IP (VoIP).
Module Type	EM Network Modules
Application/Usage	Switching Network
Height	1.6"
Width	7.1"
Depth	7.2"
Brand	Cisco
Bypass	No
Compatibility	Supported Platforms & Minimum IOS Versions: 3745 - 12.2(11)YT 3725 - 12.2(11)YT 3660 series - 12.2(11)YT 3640 - Not Available 3620 - Not Available 2691 - 12.2(11)YT 2650 - Not Available 2600XM Series - 12.2(11)YT 2600 series - Not Available 1720 - Not Available 1600 series - Not Available
Editor Choice	No
Ethernet Aui	No
Fast Ethernet Port	No
Featured	No
Form Factor	Rack-mountable
Product Name	CISCO NM-1T3/E3
Gigabit Ethernet Port	No
Green Compliant	No
Headset Port	No
Hot Swappable Power Supply	No
Input Voltage	110 V AC 220 V AC
Interfaces/Ports Details	1 x BNC Female T3/E3 Network Full-duplex WAN
ISM Band	No
Limited Warranty	90 Day
Manageable	Yes
Management Port	Yes
Maximum Data Transfer Rate	44.74 Mbit/s
Media Type	Coaxial
Memory Card Supported	CompactFlash
Alt Part No	NM1T3E3
Modular	No
DSL Port	No
Network Technology	T3/E3
Network (RJ-11)	No
Product Type	Switching Module
Additional Information	DSX3 level interface with dual female 75-ohm BNC coaxial connectors per port (separate RX and TX) Scrambling and subrate support of major DSU vendors Line build-out - Programmable for up to 450 feet of 734A or equivalent coaxial cable or up to 225 feet for 728A or equivalent coaxial cable C-bit, or M23 framing for T3, bypass and G.751 framing for E3 (software selectable) Binary 3-zero substitution (B3ZS) (T3) or high-density bipolar with three zeros (HDB3) (E3) line coding Support for 16- and 32-bit CRC (16-bit default) DS3 FEAC channel support Twenty-four-hour history maintained for error statistics and failure counts DS3 alarm and event detection (once per second polling) Alarm indication signal (AIS) Out of frame (OOF) Line code violation (LCV) Excessive zeros (EXZ) Far-end receive failure (FERF) Line and payload loopback capabilities DS3 remote-line loopback (via Far End Alarm and Control [FEAC] codes per American National Standards Institute [ANSI] T1.107a) Response to embedded loopback commands Insertion of loopback commands into transmitted signal Programmable pseudorandom pattern up to 32 bits long, including 223, 220, 215, 1s, 0s, alt-0-1 32-bit error count and bit-count registers Alarm detection - Alarm indication signal (AIS), remote alarm, far-end block error (FEBE), out of frame (OOF) Onboard processor for Maintenance Data Link (MDL) Physical space savings - Eliminates the need for external DSU device, saving valuable rack space Software-configurable T3/E3 - Provides the flexibility to deploy a single module worldwide Serial Encapsulations: HDLC PPP Frame Relay ATM Data Exchange Interface (ATM-DXI)
PoE (RJ-45) Port	No
Power Source	Power Supply
Redundant Power Supply	No
Shared SFP Slot	No
NSN Part Number	6.00E+12
SKU UNSPSC	43222600
SKU UPC	7.46E+11
Stack Port	No
Token Ring Port	No
10Gigabit Ethernet Port	No
Uplink Port	No
Usb	Yes
UNII Band	No
Wireless LAN	No


Price
Quality

CISCO NM-1T3/E3

Write Your Own Review